If you’ve ever worked with TPU (Thermoplastic Polyurethane Elastomer), you’ve probably run into a small, frustrating question that comes up in production, logistics, or even in casual product testing: Does TPU float? As a supplier who’s spent the last 12 years shipping TPU granules, custom-molded parts, and extruded profiles to industries ranging from marine gear to children’s toys, I can tell you this isn’t a simple yes or no answer. It’s a question that’s tangled up in chemistry, density, molding conditions, and even how you process the material—and getting it right can make or break a part’s performance in real-world use. Let’s break this down, straight from the perspective of someone who handles TPU every single day. TPU – Thermoplastic Polyurethane Elastomer

First, let’s start with the basics: density. Density is the core of whether a material floats or sinks, right? Any material with a density less than water (1 g/cm³ at 4°C, the standard for buoyancy calculations) will float, and anything higher will sink. TPU isn’t a single, fixed material—it’s an elastomer, which means its molecular structure can be tuned by adjusting the ratio of its two main components: hard segments and soft segments. Hard segments are usually made of diisocyanates and chain extenders, which give TPU its strength, rigidity, and resistance to abrasion. Soft segments are polyols, which make it flexible, elastic, and rubber-like.
Here’s the key point: the ratio of hard to soft segments directly changes TPU’s density. Let’s talk about the grades we supply most often. For example, our flexible TPU grades, used for things like watch bands, shoe soles, and medical tubing, have a high soft segment content. Their density hovers around 1.05 to 1.10 g/cm³. That’s just a hair above 1 g/cm³—so those flexible grades will sink in pure water. Wait, but what about our semi-rigid TPU, used for things like phone cases, industrial seals, and sports equipment? Those have a higher hard segment content, so their density is even higher, usually between 1.10 and 1.25 g/cm³. Definitely sinks.
But hold on—what about lightweight TPU parts? I’ve seen this come up a lot with customers who make flotation devices, marine fenders, or water toys. They’ll ask, “Can you make TPU that floats?” And for a long time, the answer wasn’t straightforward. You can’t just tweak the hard/soft ratio to get a density below 1 g/cm³ with standard TPU. That’s because the base chemistry of TPU is inherently denser than water. The polyurethane bonds, the molecular packing, and the typical additive packages (like stabilizers, pigments, and plasticizers) all add weight. So standard solid TPU grades don’t float—they sink. That’s a fact we’ve confirmed countless times in our in-house quality lab, where we test buoyancy by submerging molded parts in a 1000mL beaker of deionized water and timing how long it takes to reach the bottom. Our standard flexible TPU parts sink in an average of 8 seconds, semi-rigid in 5 seconds—we have those numbers logged for every batch we ship.
But wait, we’ve got a trick up our sleeve, and it’s one that’s become a game-changer for customers who need buoyant TPU. It’s called foamed TPU, or microcellular TPU. When you infuse TPU with tiny, uniform gas bubbles during the molding or extrusion process, you drastically reduce the overall density of the part. The gas bubbles take up space without adding much weight, so the overall density drops below 1 g/cm³. Our foamed TPU grades have a density as low as 0.25 g/cm³—those will float so well, you can set a part on top of a glass of water and it’ll stay there, no problem.
But foamed TPU isn’t one-size-fits-all. It has tradeoffs that customers need to understand. For example, closed-cell foamed TPU (the kind with tiny, sealed bubbles) has excellent buoyancy retention—meaning it won’t sink even if it’s submerged for years, because water can’t get into the bubbles. That’s perfect for marine applications, like life rafts, dock bumpers, or fishing net floats. Open-cell foamed TPU, on the other hand, has connected bubbles, so it’s lighter, but it will absorb water over time. That’s fine for things like pool toys or temporary flotation aids, but not for parts that need to stay afloat long-term. We always make sure to explain that difference to customers, because we don’t cut corners—we’d rather they get a part that works for their use case than one that fails.
Another factor that affects buoyancy, even with solid TPU, is the part’s geometry and molding conditions. I’ve had a customer call me panicking a few years back, saying their TPU toy boats were sinking when they tested them. They were using our standard 1.05 g/cm³ flexible TPU, and they’d molded the hulls with really thin walls—like 0.8mm thick, instead of the 2mm thick recommended. When a thin-walled part is molded, it can have air pockets trapped inside, or even tiny voids from uneven cooling. Those voids act like little internal bubbles, so the overall density of the part is lower than the base grade. In that customer’s case, the trapped air made the hull’s effective density drop to 0.98 g/cm³, so it floated. Wait, but that’s not the grade changing—that’s the part’s internal structure. I had to explain that their molding process was creating a buoyant part by accident, which was great for them, but it also meant the part might have lower strength, because thin walls are less durable. That’s the kind of on-the-ground advice we give—we don’t just sell material; we help customers use it correctly.
Then there’s the environment TPU is in, which changes buoyancy too. Water isn’t always pure, right? If you’re testing in salt water, which has a density of about 1.025 g/cm³, TPU that was just barely above 1 g/cm³ (like our 1.05 g/cm³ flexible grade) might float in salt water. I’ve seen that too—customers in coastal areas will test parts in seawater instead of fresh, and they get different results. Temperature also plays a role: water expands when it’s warmer, so its density drops slightly. At 25°C, water’s density is about 0.997 g/cm³, so a TPU part that sank in 4°C water might float in room-temperature water. It’s a small difference, but it’s enough to throw off test results if you’re not controlling for conditions.
Another common question I get: can additives make TPU float? For example, adding glass microspheres to TPU to reduce density. Yes, we do that for some lightweight parts. Glass microspheres are tiny, hollow glass beads that add almost no weight but take up volume, so they lower the overall density of the TPU compound. We can add up to 30% glass microspheres to TPU, which brings the density down to around 0.8 g/cm³—those parts float, and they still keep TPU’s inherent strength, unlike foamed parts which might be slightly less durable. But there’s a tradeoff here too: adding microspheres can make TPU a bit more brittle, so it’s not ideal for parts that need to be flexible or impact-resistant. We always weigh those pros and cons with customers before they choose a modified grade.
I’ve had so many conversations with customers over the years where this “does TPU float?” question leads to a deeper dive into their application. A few months ago, a company that makes underwater drone housings reached out to me. They thought they needed TPU that sank, so their drone would stay submerged at a set depth. But when we talked through their needs, we realized they actually needed a TPU that would float if the drone’s battery died, so they could retrieve it quickly. That meant a closed-cell foamed TPU, density 0.6 g/cm³, which is rigid enough to protect the drone’s electronics, buoyant enough to keep it afloat, and resistant to the saltwater and UV exposure it would face. If we’d just sent them a standard flexible TPU because that’s what they asked for, their drone would have sunk to the bottom of the ocean if something went wrong, and they would have lost thousands of dollars in equipment. That’s the value of working with a supplier who knows their material, not just sells it.
Let’s also bust a common myth here: some people think all rubbery materials float, right? But TPU is a thermoplastic elastomer, which is different from natural rubber or silicone. Natural rubber has a density around 0.92 g/cm³, so it floats. Silicone is around 1.1 g/cm³, so it sinks. TPU falls somewhere in between, depending on the grade. It’s easy to mix them up if you’re not working with them every day, but that’s why it’s important to have a reliable supplier to clarify the differences.
We also do a lot of custom compounding for customers who have specific buoyancy needs. For example, a manufacturer of orthopedic insoles wanted a TPU that would float so they could be used in water sports shoes, but also be rigid enough to support the arch. We developed a custom grade with a density of 0.95 g/cm³—low enough to float, high enough to maintain the structural support they needed. That’s the thing about TPU: its versatility is its biggest strength, and that means we can tailor its properties, including buoyancy, to almost any requirement.
Wait, let’s circle back to the original question to make sure we’re clear, because it’s easy to get lost in all the details. The short answer is: standard solid TPU grades sink, because their density is between 1.05 and 1.25 g/cm³, which is higher than water’s 1 g/cm³. Buoyant TPU is available through modified grades—foamed TPU, TPU with glass microspheres, or custom compounds with adjusted densities—all of which can be tuned to float or sink depending on your needs.
But beyond the chemistry, there’s a practical side to this that most people don’t think about. I’ve spent 12 years in this industry, and I’ve seen customers make costly mistakes because they didn’t fully understand how TPU works. A customer who made life jackets once bought cheap TPU granules from a supplier overseas that claimed their TPU floated, but it turned out the supplier had added too many microspheres, making the TPU so brittle that it cracked after a few months of use in salt water. That’s why we test every single batch we compound and mold for buoyancy, strength, and durability—we don’t cut corners on quality, because our reputation depends on our customers’ success.
If you’re reading this and you’re working on a project that requires TPU, whether you need it to sink for a submerged part or float for a flotation aid, don’t just guess at the grade. Reach out, and we can walk you through the options. We’ll ask about your application, the environment the part will be used in, the strength and flexibility requirements, and any other specs you have, then help you pick the right TPU grade, whether it’s a standard solid, foamed, or custom compound.

TPU is an incredible material, but its properties aren’t one-size-fits-all. The next time someone asks you “Does TPU float?” you can give them a confident answer: not standard solid grades, but we can make it float—or sink—exactly how you need it.
TPE– SBS / SEBS based References
- Hepburn, C. (1992). Polyurethane Elastomers. Elsevier Applied Science.
- International Organization for Standardization. (2015). ISO 1183: Plastics — Methods for determining the density of non-cellular plastics.
- Ashland Global Specialty Ingredients. (2021). Glass Microspheres for Lightweighting Polymer Composites.
- Society of Plastics Engineers. (2019). Microcellular Plastics: Manufacturing and Applications.
Kunshan Kesun Polymer Co., Ltd.
Kunshan Kesun Polymer Co., Ltd. is one of the most professional TPU manufacturers and suppliers in China, featured by quality products and low price. Please feel free to wholesale bulk eco-friendly TPU from our factory. Contact us for customized service and free sample.
Address: No.108, Jinmao Road, Zhoushi Town, KunShan, Jiangsu, China
E-mail: melody_yang@kesuntpe.com
WebSite: https://www.kesun-tpe.net/