Posted in

How to train employees on industrial control systems?

Hey there, let’s cut to the chase—if you’re running a manufacturing plant, a power grid, or a facility that relies on industrial control systems (ICS), you already know your entire operation hinges on those systems. And if your employees mess up when it comes to training on ICS? That’s not just a “oops” moment—it’s a risk to production, downtime, even safety. As an industrial controls supplier, I’ve seen firsthand what happens when teams skip proper ICS training: a misconfigured PLC that shut down a car assembly line for 12 hours, a tech who accidentally breached an OT network because he used the same password for his work laptop and the HMI, even near-misses with hazardous material handling because a operator didn’t recognize a faulty sensor alert. Industrial Controls

This isn’t like training on your regular office software. ICS are rugged, specialized, and they run the nuts and bolts of infrastructure that can’t afford to go dark. So when we design ICS training for our clients, we don’t just send a 10-page PDF and call it a day—we build programs that stick, that feel relevant, and that actually prepare your teams for real-world scenarios. Let’s break down how to do this right, no jargon, no fluff, just what works on the floor.

First off, stop with the one-and-done onboarding session. I get it—you’re busy, you’ve got deadlines, so you book a 2-hour lunch-and-learn on day one, hand out a binder, and move on. Bad move. ICS are complex, and new hires (even experienced techs moving to your facility) need time to wrap their heads around your specific systems—your Allen-Bradley PLCs, your Siemens HMIs, your custom SCADA setup, whatever you run. Instead, structure training as a phased, role-specific program that builds incrementally over the first 90 days.

Here’s how that looks for most teams: For new operators (the folks who interact with HMIs, run production lines, and respond to alarms), start with a 1-hour “ICS 101” session on week one—no hands-on yet, just basics: what an ICS even is, how it’s different from IT systems, why cutting corners on safety isn’t optional. Then, week two, shadow a senior operator for 4 hours, with a trainer pointing out how alarms pop up on your specific HMI, what each color means (red for critical, yellow for warning, don’t ignore that yellow!). Week three, let them practice in a “sandbox” version of your actual ICS—no risk of messing up production here, just simulated alarms and tasks to troubleshoot. And by week four, they’re on the line, with a trainer standing over their shoulder for half their shift, correcting missteps before they become problems.

For maintenance techs, it’s a different angle. They’re not just running machines—they’re fixing them, so they need to know how to work on ICS hardware without taking the whole system down. We’ve seen techs who pulled a faulty drive without locking out the system first, leading to a restart that cost $50k in lost production. So their training needs to go deeper: hands-on work with actual hardware (not just videos), lockout/tagout (LOTO) procedures specific to ICS, how to verify a drive is offline before they touch it, even common issues like overheating sensors or wiring faults. Again, phased: start with classroom, then sandbox, then supervised live work.

Another big mistake we see: generic training courses. A lot of clients buy off-the-shelf ICS training from some online platform, and it’s one size fits all—relevant to a food processing plant, a power plant, a chemical plant? Not even close. If you run a chemical facility, your ICS training needs to emphasize alarms for toxic gas sensors and emergency shutdown sequences, not how to adjust a packaging line. If you run a water treatment plant, you need to focus on level sensors and pump control, not robotics for assembly. At our company, we tailor every training module to the exact systems our clients use. Last year, we worked with a mid-sized steel mill that runs a mix of legacy PLCs and new IIoT sensors—we customized their training to walk through both old and new setups, so their techs didn’t get stuck when they had to troubleshoot an old unit mid-shift. That’s the stuff that actually matters, not a generic course about ICS 101 for every industry.

Hands-on training is non-negotiable here. You can read a manual until you’re blue in the face, but until you actually navigate your plant’s specific HMI, flip through a PLC rack, or simulate a SCADA alarm that’s tripping a production line, you’re not going to retain it. We built our own training lab for this—we set up replicas of common ICS systems we supply, so clients can bring their teams in and practice without risking their live operations. One client told us that before they used our hands-on training, their techs had a 30% error rate when troubleshooting drive faults; after, it dropped to under 5% because they’d already practiced in a safe space.

But wait—what about ongoing training, not just new hires? ICS systems don’t stand still. You’ll upgrade a PLC, add new IIoT sensors, patch a SCADA vulnerability, and every change means your team needs a refresh. Too many companies treat training as a new hire only thing, but that’s a huge gap. We recommend quarterly “refresher sessions” that are short (30-45 minutes) and focused on recent changes. If you just installed a new predictive maintenance sensor for motors, the refresher can be a demo of how to pull data from that sensor and respond to alerts. If you patched a critical OT network vulnerability, the refresher can cover the new password policy or how to connect a new device securely. We make these fun, too—no death by PowerPoint. Sometimes we do small “scavenger hunts” where teams have to find and fix a simulated issue in the training lab, or do a group quiz with small prizes for the winners. Engagement = retention, plain and simple.

Also, don’t sleep on the human element—your senior team is your best training tool. The guy who’s been fixing your PLCs for 15 years? He knows all the little quirks: that if your HMI freezes, hitting the reset button won’t work, you have to hold the power button for 10 seconds, that a yellow alarm on Sensor 7 always means a wiring fault, not a sensor itself. That’s institutional knowledge that can’t be found in a manual. So build a mentorship program where senior techs pair up with new hires or junior team members for the first 6 months. We’ve seen this work way better than formal training alone—one client’s mentorship program reduced new hire onboarding time by 2 weeks, and the senior techs got a chance to pass on knowledge that might have otherwise been lost when they retire.

Let’s talk about safety, because this is the big one. Industrial control systems are tied to physical assets, often in environments with moving parts, high voltage, or hazardous materials. Your training has to tie every technical skill to safety protocols. For example, when training operators to respond to an alarm, don’t just teach them to silence it and check the sensor—teach them the emergency shutdown sequence if the alarm is for a hazardous leak, how to alert the safety team, how to document the incident. We always include real case studies in our training—stories of clients who had a close call because someone skipped a step, or a full accident because a team member wasn’t trained properly. These are way more memorable than a textbook example. Like, last year we shared a story from a manufacturing client where an operator ignored a pressure alarm, leading to a pipe rupture that shut down the plant for 3 days and injured two workers. That’s not just a story—it’s a warning, and it sticks with people way more than “always check alarms.”

Another common pitfall: not testing your training. How do you know if your team actually gets it? After every training module, do a practical test, not a written quiz. For operators, that means having them walk through a scenario: “A pump has stopped, and the HMI shows a low pressure alarm. Walk through what you do step by step.” For techs, that means “You have to replace this faulty drive in the PLC cabinet—show me lockout/tagout, how to verify the drive is offline, and how to set up the new drive.” We do these tests in the training lab first, so if someone fails, they can go back and practice, no risk to live operations. We also do annual assessments of your whole team’s skills—find gaps, adjust training accordingly. If 80% of your operators can’t identify a critical alarm, do a refresher focused on alarms, not something else.

Now, I know what some of you are thinking: “This sounds like a lot of time and money. Can’t we just skip it?” Let’s do the math here. Downtime from an ICS mistake can cost thousands, even millions, per hour. A 12-hour shutdown for a car assembly line? That’s millions in lost revenue. An accident that injures a worker? That’s workers’ comp, OSHA fines, lawsuits, bad PR. The cost of proper training is a tiny fraction of that. And as an industrial controls supplier, we’re not just here to sell you equipment—we’re here to make sure that equipment is used safely and effectively, so you don’t have those costs.

Wait, let’s circle back to what makes ICS different from other training. Office software training is about productivity, but ICS training is about reliability and safety. You can “mess up” a Word doc and fix it, but you can’t mess up a PLC configuration on the factory floor and fix it in 10 minutes. That’s why every part of your training needs to prioritize that hands-on, role-specific, real-world focus.

So, to wrap this up: skip the one-and-done generic training. Build a phased program for new hires, tailored to your exact systems. Use hands-on labs and real plant examples, not just textbooks. Pair senior team members with new folks to pass on institutional knowledge. Do ongoing refreshers for new updates and changes. Test your team’s skills, not just their ability to memorize facts. And always tie every training lesson to safety, because that’s what’s at stake here.

If you’re looking to upgrade your team’s ICS training, or if you’re not even sure where to start with building a program that fits your facility’s needs, we’re here to help. We’ve worked with plants of all sizes—small food processing facilities, mid-sized manufacturing, large power and water utilities—to design training that actually works, cuts downtime, and keeps your team safe. Reach out to our team to chat through your specific needs, no pressure, no sales pitch.

Electrical Transformer References:

  1. Industrial Control Systems Cyber Emergency Response Team (ICS-CERT). (2022). ICS Training Best Practices for Operational Technology Teams.
  2. Occupational Safety and Health Administration (OSHA). (2021). Guidelines for Training on Industrial Control System Safety.
  3. International Society of Automation (ISA). (2020). Training Requirements for Industrial Control System Personnel, Standard ISA-TR96.00.02.
  4. Manufacturing Extension Partnership (MEP). (2023). Reducing Downtime Through Targeted ICS Employee Training.

Zhejiang Znfo Electric Co., Ltd.
With abundant experience, we are one of the most professional industrial controls manufacturers in China. Please feel free to buy discount industrial controls made in China here and get quotation from our factory. All customized products are with high quality and low price.
Address: Xidong Village, Liushi Town, Yueqing City, Wenzhou City, Zhejiang Province
E-mail: postmaster@znfoie.com
WebSite: https://www.znfoie.com/